Hello to all,
I'm looking for someone who can provide me with milled aluminum pieces on an on-going basis. My prior supplier has moved on to another state.
We make the Header Power Bracket. I'm looking for someone who can make and furnish the aluminum spacers. They are ~5.5" x 1.125" x 1" on the flat side, with two slotted areas and a 1/4-20 screw.
There are three versions (smooth, ball-milled, and ribbed) and I have the tool to cut the four rib pockets simultaneously for the ribbed units. The finish is "scotch-brited" to remove machining marks. The products may be viewed at our web site included at the link.
At this time we are only looking for someone who can supply the aluminum spacers and not the steel brackets.
We had been ordering in lots of 50 units @ $11 for the smooth pieces and $13 for either the ball-milled or ribbed and would like to hold the line because while we do Internet sales, we also have a major distributor who doesn't pay that price. If you can do this work and match the costs, we are in Orange County California and would prefer a local supplier, but will go elsewhere if it becomes necessary.
Again, the pieces may be viewed at the website in the link.
Thanks,
Header Power Bracket
Todd Brody,
Owner
http://headerbracket.com/index.html
Aluminum Milling Services Requested for On-going Production
Moderator: Harold_V
Re: Aluminum Milling Services Requested for On-going Product
Uh oh...this must mean that the Shopmaster isn't cutting it.
Glenn
Operating machines is perfectly safe......until you forget how dangerous it really is!
Operating machines is perfectly safe......until you forget how dangerous it really is!
Re: Aluminum Milling Services Requested for On-going Product
The job is too involved in that I would have to be manually changing out tools. Also, the advance speed would be down such that it would not be economical. Also, I have no way to cut the billet aluminum bar stock clean. Further, I could see that one batch of 50 could do in the ShopMaster and I can't trust production to a finicky Chinese toy. The ShopMasters do not like to run continuously.Glenn Wegman wrote:Uh oh...this must mean that the Shopmaster isn't cutting it.
My machinist did these on a Fadal 4020.
- Mid Day Machining
- Posts: 418
- Joined: Thu Apr 09, 2009 10:58 am
- Location: San Clemente, CA
Re: Aluminum Milling Services Requested for On-going Product
Good morning Todd,
I just saw your post. My name is Steve Seebold. I am in San Clemente, CA and I have a CNC milling machine in my garage. My rate are reasonable and my quality is excellent.
I call myself Mid Day Machining because I seldom start before 11:00 AM. I still get in an 8 to 10 hour day. I'll just work into the evening.
My main product line is running gear for gas powered remote control race boats, but I'll work on anything as long as there's no steel involved. I just don't like the small slivery chips you get from steel.
You can reach me at 714-420-2453 or middaymachining@cox.net
I just saw your post. My name is Steve Seebold. I am in San Clemente, CA and I have a CNC milling machine in my garage. My rate are reasonable and my quality is excellent.
I call myself Mid Day Machining because I seldom start before 11:00 AM. I still get in an 8 to 10 hour day. I'll just work into the evening.
My main product line is running gear for gas powered remote control race boats, but I'll work on anything as long as there's no steel involved. I just don't like the small slivery chips you get from steel.
You can reach me at 714-420-2453 or middaymachining@cox.net
You can buy good parts, or you can buy cheap parts, but you can't buy good cheap parts.
Re: Aluminum Milling Services Requested for On-going Product
Thanks for responding and it was nice talking with you this morning. The order has been filled, but maybe the next run.
Thanks again
Thanks again