Small Diameter Slitting Saw

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: Harold_V, websterz, GlennW

User avatar
tornitore45
Posts: 1700
Joined: Tue Apr 18, 2006 12:24 am
Location: USA Texas, Austin

Re: Small Diameter Slitting Saw

Post by tornitore45 » Mon Apr 15, 2019 9:06 am

I did not even consider modifying a Woodruff cutter. Is a possibility if the shank length allow for collet depth and reach across all the fins.
Mauro Gaetano
in Austin TX

User avatar
ehughes
Posts: 46
Joined: Sun Jan 02, 2005 6:35 pm
Location: N. E. IL

Re: Small Diameter Slitting Saw

Post by ehughes » Mon Apr 15, 2019 10:34 am

Hi, Small slitting saws are used for undercutting mica in motor commutators. Available from supplies to motor rebuilders, EIS for example, but they have a large minimum order. Or did the last time i looked, may be others. We had some IIRC were HS, unfortunately destroyed in a fire. Regards, Earl

Post Reply