Rebuilding a Telco tapping head

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: GlennW, Harold_V

Post Reply
ecdez
Posts: 30
Joined: Mon Mar 12, 2012 4:14 pm

Rebuilding a Telco tapping head

Post by ecdez »

My tapping head was slipping every time I used it so I had to tear it apart and rebuild it. Turns out it was just very greasy inside. Appears that was causing the problem as it works fine now.

20180815_053313.jpg
20180815_053246.jpg
20180815_145431[1].jpg
20180815_145606[1].jpg

Here's a video of the process if that's your thing.
https://youtu.be/VZQjgNjChvw
Top
Post Reply

Return to “General Discussion”