9mm 80% AR15 lower receiver

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: Harold_V, websterz, GlennW

Post Reply
WJH
Posts: 1408
Joined: Sat Jan 16, 2010 9:29 pm
Location: Florida

9mm 80% AR15 lower receiver

Post by WJH » Sat Sep 15, 2018 2:46 pm

Cleaned up my shop and decided to get back into machining. A 9mm AR receiver that takes MP5 mags caught my eye...
Image
Making the jigs to hold it in my vise...
Image
Drilling and reaming the pin and selector holes...
Image
Milling out the cavity...
Image

This is going to be a fun pistol / PDW
Image

Sent from my SM-G950U1 using Tapatalk


Jawn
Posts: 282
Joined: Wed Apr 09, 2014 12:39 pm
Location: Canton, GA

Re: 9mm 80% AR15 lower receiver

Post by Jawn » Sat Sep 15, 2018 11:30 pm

Very cool. What sort of upper is going on it?

WJH
Posts: 1408
Joined: Sat Jan 16, 2010 9:29 pm
Location: Florida

Re: 9mm 80% AR15 lower receiver

Post by WJH » Sun Sep 16, 2018 4:10 am

Jawn wrote:Very cool. What sort of upper is going on it?
New Frontier Armory side cocking C5, 8" barrel. Free floating with Mlok.

Sent from my SM-G950U1 using Tapatalk


Post Reply