Mc-60 controller

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: GlennW, Harold_V

Post Reply
sasnecro
Posts: 3
Joined: Sat Dec 12, 2020 1:27 pm

Mc-60 controller

Post by sasnecro »

New here guys. I been using site for years love it. But heres my question. I have a mc-60 board wired to the treadmill motor. When i plug it in i trip the breaker. I have a potentiometer on the way but not having one plugged in would that be the cause of this? Tested the motor on a power supply works fine.
Top
John Hasler
Posts: 1852
Joined: Tue Dec 06, 2016 4:05 pm
Location: Elmwood, Wisconsin

Re: Mc-60 controller

Post by John Hasler »

Don't operate it with no potentiometer. Hopefully you haven't zapped it.
Top
sasnecro
Posts: 3
Joined: Sat Dec 12, 2020 1:27 pm

Re: Mc-60 controller

Post by sasnecro »

I was hoping it was the potentiometer. Thanks hopefully it is.
Top
Post Reply

Return to “General Discussion”