Center drilling (More basic questions)

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: GlennW, Harold_V

User avatar
warmstrong1955
Posts: 3568
Joined: Thu Mar 18, 2010 2:05 pm
Location: Northern Nevada

Re: Center drilling (More basic questions)

Post by warmstrong1955 »

SteveM wrote: (let's not open that can of worms)
Yet here we are (again).....knee deep in lumbricus terrestris.......

;)
Today's solutions are tomorrow's problems.
spro
Posts: 8016
Joined: Mon Feb 20, 2006 11:04 pm
Location: mid atlantic

Re: Center drilling (More basic questions)

Post by spro »

They actually sell a plastic crankshaft which offsets the roll. What's up with TP anyway? It's all hole and less paper than it looks.
User avatar
warmstrong1955
Posts: 3568
Joined: Thu Mar 18, 2010 2:05 pm
Location: Northern Nevada

Re: Center drilling (More basic questions)

Post by warmstrong1955 »

spro wrote: It's all hole and less paper......
The targets of opportunity in that sentence.....but I will show self control......

;)

:lol: :lol:
Today's solutions are tomorrow's problems.
spro
Posts: 8016
Joined: Mon Feb 20, 2006 11:04 pm
Location: mid atlantic

Re: Center drilling (More basic questions)

Post by spro »

Yeah. Good job on that. I thought "crankshaft" would be the trigger :)
spro
Posts: 8016
Joined: Mon Feb 20, 2006 11:04 pm
Location: mid atlantic

Re: Center drilling (More basic questions)

Post by spro »

I think we were very close to a larger hole with more paper. As in carbon paper or polize state monitoring every single input and output and medical system to cull out or re educate the refuzeniks. Then of course every individual's personal data spewed across the world. Uh oh , woulda thought.
EOsteam
Posts: 240
Joined: Thu Jan 31, 2013 1:33 am
Location: Pendleton, Oregon

Re: Center drilling (More basic questions)

Post by EOsteam »

Going back to the earlier reference to the Tailstock. Myford (English lathe) refers to the part as the Tailstock barrel.
John Hasler
Posts: 1852
Joined: Tue Dec 06, 2016 4:05 pm
Location: Elmwood, Wisconsin

Re: Center drilling (More basic questions)

Post by John Hasler »

EOsteam wrote:Going back to the earlier reference to the Tailstock. Myford (English lathe) refers to the part as the Tailstock barrel.
That's a good name for it. Let's compromise on that.
spro
Posts: 8016
Joined: Mon Feb 20, 2006 11:04 pm
Location: mid atlantic

Re: Center drilling (More basic questions)

Post by spro »

"Barrel" it is, henceforth.
User avatar
liveaboard
Posts: 1971
Joined: Sun Dec 08, 2013 1:40 pm
Location: southern Portugal
Contact:

Re: Center drilling (More basic questions)

Post by liveaboard »

Having spent many years in the East [not the east coast of the US, WAY east in Asia] we do not use toilet paper in my house.

This is best explained by a thought provoking question; if you had excrement on your face, would you wipe it off, or wash it off? and Why?
People's privy habits tend to be fixed from a young age so I expect no one will be taking this at all seriously.

I installed a toilet roll holder anyway.

Toilet roll barrel.
Hmmm. Better than "ram".
User avatar
ctwo
Posts: 2996
Joined: Tue Mar 27, 2012 12:37 pm
Location: Silly Cone Valley

Re: Center drilling (More basic questions)

Post by ctwo »

I would say, after spending some time in Japan, I would not mind installing a bidet. We would keep the paper too...
Standards are so important that everyone must have their own...
To measure is to know - Lord Kelvin
Disclaimer: I'm just a guy with a few machines...
Mr Ron
Posts: 2126
Joined: Tue Dec 22, 2009 12:36 pm
Location: Vancleave, Mississippi

Re: Center drilling (More basic questions)

Post by Mr Ron »

liveaboard wrote: This is best explained by a thought provoking question; if you had excrement on your face, would you wipe it off, or wash it off? and Why?
Why would there be excrement on your face in the first place?
Mr.Ron from South Mississippi
User avatar
warmstrong1955
Posts: 3568
Joined: Thu Mar 18, 2010 2:05 pm
Location: Northern Nevada

Re: Center drilling (More basic questions)

Post by warmstrong1955 »

Mr Ron wrote: Why would there be excrement on your face in the first place?
Too much time at the saloon??

No wait....that's different.....

:)
Today's solutions are tomorrow's problems.
Post Reply