Prazi carriage stop

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: GlennW, Harold_V

Post Reply
henryr
Posts: 25
Joined: Mon Jan 15, 2018 1:20 pm
Location: Connecticut USA

Prazi carriage stop

Post by henryr »

So after making the handles it seemed time to make a carriage lock. Here are pics and dimensioned drawings.
The round black locking pads are a very hard plastic that I tapped to accept 10-24 screw threads. After tapping them I put super glue around the edge of the cover and closed it so when they get screwed on to the threaded adjustment screws the cover won't pop open.
DSC00530carriage stop3.JPG
DSC00529carriage stop2JPG.JPG
DSC00532carriage stop5.JPG
prazi carraige stop2.jpg
prazi carraige stop1.jpg
DSC00538.JPG
henryr
Posts: 25
Joined: Mon Jan 15, 2018 1:20 pm
Location: Connecticut USA

Re: Prazi carriage stop

Post by henryr »

here are a few more pics
Attachments
prazi carraige stop3.jpg
DSC00537carriage stop8.JPG
DSC00536carriage stop7.JPG
DSC00531carriage stop4JPG.JPG
DSC00535carriage stop6.JPG
LouStule
Posts: 86
Joined: Fri Sep 11, 2020 7:20 pm
Location: Washington State

Re: Prazi carriage stop

Post by LouStule »

Good job!
Post Reply