Looking for specific information?

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: Harold_V, GlennW

Post Reply
Harold_V
Posts: 16870
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Looking for specific information?

Post by Harold_V » Sat May 15, 2010 2:18 pm

Readers,

If you are looking for information concerning threading, tool grinding, grinding wheel selection, or information in general pertaining to lathe operations, please visit The Resource Library, which can be found on the main index, 15th forum down from the top, or you can click this link. http://www.chaski.org/homemachinist/viewforum.php?f=44

Harold
Wise people talk because they have something to say. Fools talk because they have to say something.

johns10
Posts: 1
Joined: Wed Oct 21, 2015 1:21 am

Re: Looking for specific information?

Post by johns10 » Wed Oct 21, 2015 10:05 am

pc-23 lathe

Harold_V
Posts: 16870
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Re: Looking for specific information?

Post by Harold_V » Wed Oct 21, 2015 3:38 pm

johns10 wrote:pc-23 lathe
It's not clear what you wish to learn. I suggest asking exactly what you desire to achieve. Don't be vague.

Harold
Wise people talk because they have something to say. Fools talk because they have to say something.

attie
Posts: 2
Joined: Sun Oct 30, 2016 5:54 am

Re: Looking for specific information?

Post by attie » Thu Nov 10, 2016 12:53 pm

Looking for any literature I e manual/handbook/instructions on a SHEN WAI WINCHESTER TYPE 250 lathe

User avatar
SteveM
Posts: 6484
Joined: Mon Jun 27, 2005 6:18 pm
Location: Connecticut

Re: Looking for specific information?

Post by SteveM » Thu Nov 10, 2016 1:08 pm

attie wrote:Looking for any literature I e manual/handbook/instructions on a SHEN WAI WINCHESTER TYPE 250 lathe
You need to create a new thread in an appropriate forum on the board; for this, probably the lathe forum.

Virtually nobody is going to see it here.

Steve

Post Reply