HARDINGE KL-1 CHUCK

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: GlennW, Harold_V

Post Reply
ARM
Posts: 18
Joined: Fri Nov 11, 2011 3:19 pm
Location: Durban, South Africa
Contact:
Contact ARM

HARDINGE KL-1 CHUCK

Post by ARM »

Hi Guys
We are looking for a 4 Jaw Self-Centering chuck with a wrench, plus some Tooling for this machine which is a copy of the HLV-H.
Any leads, sources and directions where available would be immensely appreciated.
Thanks in anticipation.
aRM
Top
stevec
Posts: 1949
Joined: Thu Oct 21, 2010 12:40 pm
Location: N.S. Canada

Re: HARDINGE KL-1 CHUCK

Post by stevec »

Try this link. http://www.machineryhouse.com.au/Lathe- ... late-Mount
Top
Post Reply

Return to “Lathes”