Power Z axis

Discussion on all milling machines vertical & horizontal, including but not limited to Bridgeports, Hardinge, South Bend, Clausing, Van Norman, including imports.

Moderators: Harold_V, GlennW

Chris Smith
Posts: 15
Joined: Tue Sep 23, 2008 9:44 pm
Location: Tucson, AZ

Re: Power Z axis

Post by Chris Smith » Tue Jul 20, 2021 5:59 pm

I made the mistake of photographing it as it roared by. I should have used the tripod and remote trigger because I missed seeing all the motion which is considerable. The ground quakes as it passes by. I think it was doing 60 mph or more.

Chris

kl7sg
Posts: 41
Joined: Thu Oct 08, 2020 12:00 pm
Location: Springtown, TX

Re: Power Z axis

Post by kl7sg » Tue Jul 20, 2021 6:55 pm

With some luck, I will get to see it in Fort Worth.
Have a nice day,

Mike

User avatar
NP317
Posts: 3085
Joined: Tue Jun 24, 2014 2:57 pm
Location: Northern Oregon

Re: Power Z axis

Post by NP317 » Wed Jul 21, 2021 11:34 am

Seeing a Big Boy steaming by is on my bucket list.
I never thought I'd ever have that opportunity.
Quite amazing that the UP Steam Program made it happen!
RussN

Post Reply