Show us your milling machine!

Discussion on all milling machines vertical & horizontal, including but not limited to Bridgeports, Hardinge, South Bend, Clausing, Van Norman, including imports.

Moderators: GlennW, Harold_V

moondog
Posts: 2
Joined: Wed Aug 15, 2012 12:22 pm
Location: Ridgecrest, CA
Contact:

Re: Show us your milling machine!

Post by moondog » Tue Apr 12, 2022 12:20 pm

20171129_2114321.jpg
20171129_2114591.jpg
20171129_2115141.jpg
20171129_2115321.jpg

earlgo
Posts: 1733
Joined: Sat Jan 29, 2011 11:38 am
Location: NE Ohio

Re: Show us your milling machine!

Post by earlgo » Sat Apr 16, 2022 3:41 pm

Producto- Matic Horizontal Mill, date unknown but surely pre WWII.
Producto name plate.jpg
Producto Mill#1.JPG
--earlgo
Before you do anything, you must do something else first. - Washington's principle.

Fasturn
Posts: 6
Joined: Thu Sep 15, 2022 8:04 pm

Re: Show us your milling machine!

Post by Fasturn » Sat Sep 17, 2022 12:44 pm

20200414_152723_rotated.jpg
Last edited by rmac on Sat Sep 17, 2022 1:11 pm, edited 1 time in total.
Reason: Photo Orientation

SRWtxtn19
Posts: 2
Joined: Sun Nov 20, 2022 4:18 pm

Re: Show us your milling machine!

Post by SRWtxtn19 » Sun Nov 20, 2022 5:02 pm

mini shop 2 (2).jpg
Attachments
4 inch 2.jpg

User avatar
GlennW
Posts: 7151
Joined: Sun Apr 15, 2007 9:23 am
Location: Florida

Re: Show us your milling machine!

Post by GlennW » Sun Nov 20, 2022 5:05 pm

Way too clean!

Where are all of the chips? :)
Glenn

Operating machines is perfectly safe......until you forget how dangerous it really is!

User avatar
Bill Shields
Posts: 8536
Joined: Fri Dec 21, 2007 4:57 am
Location: Somewhere in the World
Contact:

Re: Show us your milling machine!

Post by Bill Shields » Sun Nov 20, 2022 5:42 pm

Chips? Wazza chip?
Too many things going on to bother listing them.

SRWtxtn19
Posts: 2
Joined: Sun Nov 20, 2022 4:18 pm

Re: Show us your milling machine!

Post by SRWtxtn19 » Mon Nov 21, 2022 7:00 am

That was before I really started into the projects list. Now there's some chip glitter. :D

User avatar
rmac
Posts: 617
Joined: Tue Jun 26, 2012 12:48 am
Location: Phoenix, Arizona

Re: Show us your milling machine!

Post by rmac » Mon Nov 21, 2022 10:36 am

SRWtxtn19 wrote:
Mon Nov 21, 2022 7:00 am
That was before I really started into the projects list. Now there's some chip glitter. :D
Good to hear. Welcome to the forum.

Post Reply