Hi folks. I'm looking for a high-quality cross slide table that reads inches natively. It should be at least 6x18, and have a universal type mount. If it can be easily upgraded in the future to power feed/CNC, that would be a bonus.
I'm not overly concerned about country of origin, just a reasonably priced and accurate design.
Thanks!
Chris
ISO high-quality cross slide table
- Adirondack
- Posts: 410
- Joined: Tue Aug 23, 2011 6:59 pm
- Location: southern CT
ISO high-quality cross slide table
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
-
- Posts: 1757
- Joined: Sat Dec 21, 2002 12:16 am
- Location: Green Bay Wisconsin USA
- Contact:
Re: ISO high-quality cross slide table
If you want high Quality, then you want a Troyke , They are the ultimate !
but not sure what sizes they have. I had a Troyke 12 x 12 years ago.. but long gone
Many Troke's also have a rotary table which was a favorite years ago before CNC .
I assume you want something like this ---never seen one like this that was high precision
https://www.ebay.com/itm/164278234948?_ ... 7023757324
Rich
but not sure what sizes they have. I had a Troyke 12 x 12 years ago.. but long gone
Many Troke's also have a rotary table which was a favorite years ago before CNC .
I assume you want something like this ---never seen one like this that was high precision
https://www.ebay.com/itm/164278234948?_ ... 7023757324
Rich