Cincinnati Mill Parts

Discussion on all milling machines vertical & horizontal, including but not limited to Bridgeports, Hardinge, South Bend, Clausing, Van Norman, including imports.

Moderators: GlennW, Harold_V

Post Reply
heisler0
Posts: 153
Joined: Sun Aug 16, 2009 6:06 pm
Location: Brunswick, MD

Cincinnati Mill Parts

Post by heisler0 »

Anyone got a source for reasonably priced Cincinnati mill parts. Looking for a phenolic gear located inside of knee for a Cinova 80 I have a part number 300895.
Top
Lazz
Posts: 167
Joined: Sun Jul 29, 2012 11:06 pm
Location: The Warm Arizona Deserts... Phoenix to be precise...

Re: Cincinnati Mill Parts

Post by Lazz »

I just cut one for my Famco. It wasnt all that hard mostly messy.
Top
heisler0
Posts: 153
Joined: Sun Aug 16, 2009 6:06 pm
Location: Brunswick, MD

Re: Cincinnati Mill Parts

Post by heisler0 »

Well that's what we where planning to do just thought I would take a day or two and look to see if one was available before we start.
Top
Post Reply

Return to “Milling Machines”