Lathe, Ramco TK 380

This is where bits of wisdom will be stored, a frequently asked question section with answers.

Moderators: Harold_V, WJH

Post Reply
Gary Muto
Posts: 1
Joined: Fri Dec 27, 2013 6:12 pm

Lathe, Ramco TK 380

Post by Gary Muto » Fri Dec 27, 2013 7:04 pm

Does anyone out there have a manual for a Ramco TK 380 lathe or know where I can purchase one? This is a great old lathe that needs some work.

User avatar
Posts: 2600
Joined: Sun Mar 14, 2010 8:11 pm
Location: Mesa, Arizona. 85201-1517

Re: Lathe, Ramco TK 380

Post by ken572 » Sat Dec 28, 2013 8:41 pm

Hello :!: Gary Muto :D

Welcome to The Home Machinist! 8)

As you have found out, we have members
that really enjoy helping each other, and
sharing there skill’s and or knowledge,as
well as there project’s, idea’s, and more.

In order for this to happen smoothly there
are a few things that are NEEDED:

1)Correct brand names of what ever you
are asking about.

2)Correct Serial numbers, Model numbers,
Date, and or Country of manufacturer,
Size’s, Colors, Clear Picture’s of the item,
and or it’s data plates, and anything else
you can supply for the members to work

3)Do you already have,
Operator and Parts, Manual’s :?:

4) Making sure that you put your
PROFILE so it show’s up to the left
of all of your POST’S under your name.
VERY HELPFUL, to member’s trying
to assist you.

Ken. :)
One must remember.
The best learning experiences come
from working with the older Masters.

Posts: 2
Joined: Mon Nov 20, 2017 3:58 pm

Re: Lathe, Ramco TK 380

Post by alyons » Mon Nov 20, 2017 4:06 pm

Hello Gary , I was wondering if you were ever able to find a manual for your lathe? Thanks

Post Reply