Looking for part info for Simpson Supremacy lathe model 109.20630

This is where bits of wisdom will be stored, a frequently asked question section with answers.

Moderator: Harold_V

Post Reply
crashcrippleton
Posts: 1
Joined: Fri Oct 16, 2020 12:01 am

Looking for part info for Simpson Supremacy lathe model 109.20630

Post by crashcrippleton »

:roll: I am looking for a part for a Simpson Supremacy model 109.20630. Need a jaw key for the head. Lost one of the three. Can anyone help?

crashcrippleton@gmail.com
SteveM
Posts: 7763
Joined: Mon Jun 27, 2005 6:18 pm
Location: Wisconsin

Re: Looking for part info for Simpson Supremacy lathe model 109.20630

Post by SteveM »

Can you post a picture of it?

With a part number like that, it sounds like the lathe made by Ann Arbor Engineering and sold thru sears.

A part for the chuck might be based on who made the chuck and not the lathe. Look on the chuck for a brand, and model number. Also, what's the size?

You should post a pic of the chuck, too.

Steve
Post Reply