Carbide Insert Identification

This is where bits of wisdom will be stored, a frequently asked question section with answers.

Moderators: Harold_V, WJH

Post Reply
User avatar
GlennW
Posts: 6732
Joined: Sun Apr 15, 2007 9:23 am
Location: Florida

Carbide Insert Identification

Post by GlennW » Sat Sep 11, 2010 8:14 pm

Glenn

Operating machines is perfectly safe......until you forget how dangerous it really is!

endmill
Posts: 122
Joined: Tue Nov 06, 2007 7:06 pm
Location: Nashport,Oh

Re: Carbide Insert Identification

Post by endmill » Sun Dec 19, 2010 7:53 am

GREAT SITE!!!!!!!!!!!!!!!!

Harold_V
Posts: 17618
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Re: Carbide Insert Identification

Post by Harold_V » Sun Dec 19, 2010 10:31 pm

Thanks, Glenn. I printed the entire thing so I can finally become more familiar with insert carbide.

Harold
Wise people talk because they have something to say. Fools talk because they have to say something.

User avatar
ken572
Posts: 2600
Joined: Sun Mar 14, 2010 8:11 pm
Location: Mesa, Arizona. 85201-1517

Re: Carbide Insert Identification

Post by ken572 » Thu Jul 17, 2014 10:41 pm

Glenn,

Is this where they moved this site to ?

ANSI B212.4-2002 Cutting Tools – Indexable Inserts – Identification

http://www.freestd.us/soft/105416.htm

Ken. :)
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.

User avatar
GlennW
Posts: 6732
Joined: Sun Apr 15, 2007 9:23 am
Location: Florida

Re: Carbide Insert Identification

Post by GlennW » Thu Jul 17, 2014 11:03 pm

I have no idea what it was, Ken.

Probably something like this:

http://www.carbidedepot.com/formulas-insert-d.htm

http://www.carbidedepot.com/templates.htm
Glenn

Operating machines is perfectly safe......until you forget how dangerous it really is!

User avatar
ken572
Posts: 2600
Joined: Sun Mar 14, 2010 8:11 pm
Location: Mesa, Arizona. 85201-1517

Re: Carbide Insert Identification

Post by ken572 » Fri Jul 18, 2014 12:09 am

Thanks Glenn. :D

Ken. :)
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.

Post Reply