For Tiny thread Making Job's

This is where bits of wisdom will be stored, a frequently asked question section with answers.

Moderator: Harold_V

Post Reply
User avatar
ken572
Posts: 2600
Joined: Sun Mar 14, 2010 8:11 pm
Location: Mesa, Arizona. 85201-1517

For Tiny thread Making Job's

Post by ken572 »

ALL :wink: that machine very small parts. 8)

NON-LINEAR SCREW CUTTING ATTACHMENT
Developed by General Miniaturization Laboratory
National Bureau of Standards
For Bureau of Aeronautics
For 9” Southbend Lathe
Department of the Navy 1949 (21p)
http://wewilliams.net/docs/NON-LINEAR%2 ... 0LATHE.pdf

Enjoy. :D

Ken. :)
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.
Top
Post Reply

Return to “The Resource Library”