Steam turbo generator
-
- Posts: 666
- Joined: Mon Jan 12, 2009 11:45 pm
- Location: Port Angeles, WA
- Contact:
Steam turbo generator
Does anybody know of a source for dynamo castings?
www.banninglocomotiveworks.com
www.littleengines.com
www.littleengines.com
-
- Posts: 1595
- Joined: Sun Jan 05, 2003 8:47 am
- Location: Florida, on the Lake Wales Ridge
Re: Steam turbo generator
What model are you looking for?
Tim
Tim
He who dies with the most unfinished projects: Should of put more time into their hobby.
-
- Posts: 666
- Joined: Mon Jan 12, 2009 11:45 pm
- Location: Port Angeles, WA
- Contact:
Re: Steam turbo generator
Pyle National, Sunbeam
www.banninglocomotiveworks.com
www.littleengines.com
www.littleengines.com
- ChuckHackett-844
- Posts: 232
- Joined: Wed May 03, 2017 3:54 pm
- Location: Tampa, Florida
Re: Steam turbo generator
Little Engines has castings for the dummy version. I have a set but I have not built it yet.
Regards,
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"
-
- Posts: 666
- Joined: Mon Jan 12, 2009 11:45 pm
- Location: Port Angeles, WA
- Contact:
Re: Steam turbo generator
Little Engines carry these casting kits
www.banninglocomotiveworks.com
www.littleengines.com
www.littleengines.com
Re: Steam turbo generator
I believe that the MO5 (the set with the Quarter) is the same patterns as used in the Mosley design.
There is a bearing recess in the front casting.
I have a design for making it functional and if I ever get my butt in gear, I'll have it published in LS&OR.
Karl
www.karlkobel.com
There is a bearing recess in the front casting.
I have a design for making it functional and if I ever get my butt in gear, I'll have it published in LS&OR.
Karl
www.karlkobel.com
-
- Posts: 348
- Joined: Tue Jan 07, 2003 2:56 am
- Location: Waltham, MA
Re: Steam turbo generator
Francis Mosley made the Pyle-National MO-6 turbogenerator.
Re: Steam turbo generator
Howard,
You are correct, my mistake (I can always claim the little label is hard to read
There are two original Mosley turbogenerators within our group and my casting match.
I bought them as a dummy turbogenerator set from the vendor that owned them before L.E. (I don't remember the name).
Karl
You are correct, my mistake (I can always claim the little label is hard to read
There are two original Mosley turbogenerators within our group and my casting match.
I bought them as a dummy turbogenerator set from the vendor that owned them before L.E. (I don't remember the name).
Karl