Has anybody shared a simple way to hook up a nice sounding digital bell sound for a steam locomotive? 12V, speaker under the tender, push button gives the typical ringing bell sound. I guess there might be an inexpensive sound chip out there with good quality?
Thanks!
Digital steam locomotive bell?
-
- Posts: 210
- Joined: Wed Jan 30, 2008 7:24 am
- Location: Manhattan Beach, CA
Re: Digital steam locomotive bell?
I designed one some years back (schematic attached) and it sounded pretty good but I never installed it.
The down-side is that you have to download an audio clip, open it in a Hex editor, and trim out the code to transfer to the ROM, and then program the ROM.
The down-side is that you have to download an audio clip, open it in a Hex editor, and trim out the code to transfer to the ROM, and then program the ROM.
-
- Posts: 210
- Joined: Wed Jan 30, 2008 7:24 am
- Location: Manhattan Beach, CA
Re: Digital steam locomotive bell?
Thanks DianneB. There was a time when I was set up for ROM pogramming, no longer. I found a relatively (?) inexpensive sound card at mylocosound. All I need is the bell. I should be able to put the card and a reasonably sized speaker in a box, hang it under the tender. http://www.mylocosound.com/
- Bill Shields
- Posts: 10560
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: Digital steam locomotive bell?
does it sound like an Amtrak bell?
Too many things going on to bother listing them.