85th Anniversary Meet at Montreal - Reminder

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: Harold_V, WJH, cbrew

UKlocoNut
Posts: 38
Joined: Sun Oct 12, 2008 7:45 pm
Location: Montreal QC

Re: 85th Anniversary Meet at Montreal - Reminder

Post by UKlocoNut » Mon Jun 17, 2019 11:01 am

Yay, good news.

One Banoffi pie coming up, extra coffee ordered..............

User avatar
tsph6500
Posts: 1344
Joined: Fri Dec 03, 2004 3:38 pm
Location: West of Dunvegan, Ontario CANADA
Contact:

Re: 85th Anniversary Meet at Montreal - Reminder

Post by tsph6500 » Tue Jun 18, 2019 7:32 am

Steve Bratina wrote:
Mon Jun 17, 2019 10:29 am
I will be there Saturday afternoon.
Yay! Steve-o is in the roundhouse. The Tinkerbells will hold their annual Big Head elections on Saturday. No trains shall run until the Big Head from Kirkwall arrives.
Best regards,
Jim Leggett

Montreal Live Steamers
www.montreallivesteamers.org

A Founding Member of the Tinkerbell Scale Society - Northern Division
I'm an A.R.S.E. (Association of Railroad Steam Engineers)
Toad Swamp & Punk Hollow Railroad - Head Tycoon
The Juvenile Traction Company - CEO & Apprentice Machinist 3rd Class
White Mountain Central RR - Engineer

User avatar
tsph6500
Posts: 1344
Joined: Fri Dec 03, 2004 3:38 pm
Location: West of Dunvegan, Ontario CANADA
Contact:

Re: 85th Anniversary Meet at Montreal - Reminder

Post by tsph6500 » Tue Jun 18, 2019 7:43 am

Marty_Knox wrote:
Fri Jun 14, 2019 6:45 pm
I will be driving over from Michigan. Are there any toll roads to watch out for in Quebec, like the 407 in Ontario?
Hi Marty,

Great to hear you are coming to our Meet.

There are no tolls for thee… head west on the 401 through Ontario. It changes the designation to Autoroute 20 when you cross into Quebec. Keep going eastward.

Take exit 26 (Les Cèdres), turn right onto Chemin Ste-Féréol. You will notice that you are now driving in French. C'est strange, non?

Drive into the village of Les Cèdres to the T intersection at the river. You can buy ice and adult beverages at the corner store if required…

Turn right onto Chemin du Fleuve (the River Road). We will be on your right at 1396 Chemin du Fleuve. Look for smoke and guys in dirty overalls. That's us.
Best regards,
Jim Leggett

Montreal Live Steamers
www.montreallivesteamers.org

A Founding Member of the Tinkerbell Scale Society - Northern Division
I'm an A.R.S.E. (Association of Railroad Steam Engineers)
Toad Swamp & Punk Hollow Railroad - Head Tycoon
The Juvenile Traction Company - CEO & Apprentice Machinist 3rd Class
White Mountain Central RR - Engineer

User avatar
Marty_Knox
Posts: 1392
Joined: Thu Jan 09, 2003 6:50 pm
Location: Michigan, USA

Re: 85th Anniversary Meet at Montreal - Reminder

Post by Marty_Knox » Tue Jun 18, 2019 7:48 am

tsph6500 wrote:
Tue Jun 18, 2019 7:43 am
Marty_Knox wrote:
Fri Jun 14, 2019 6:45 pm
I will be driving over from Michigan. Are there any toll roads to watch out for in Quebec, like the 407 in Ontario?
Hi Marty,

Great to hear you are coming to our Meet.

There are no tolls for thee… head west on the 401 through Ontario. It changes the designation to Autoroute 20 when you cross into Quebec. Keep going eastward.

Take exit 26 (Les Cèdres), turn right onto Chemin Ste-Féréol. You will notice that you are now driving in French. C'est strange, non?
Merci, mon Ami!

User avatar
tsph6500
Posts: 1344
Joined: Fri Dec 03, 2004 3:38 pm
Location: West of Dunvegan, Ontario CANADA
Contact:

Re: 85th Anniversary Meet at Montreal - Reminder

Post by tsph6500 » Tue Jun 18, 2019 8:17 am

Marty_Knox wrote:
Tue Jun 18, 2019 7:48 am

Merci, mon Ami!
You're all set!

Did we tell you that you must wear a black beret"?
Best regards,
Jim Leggett

Montreal Live Steamers
www.montreallivesteamers.org

A Founding Member of the Tinkerbell Scale Society - Northern Division
I'm an A.R.S.E. (Association of Railroad Steam Engineers)
Toad Swamp & Punk Hollow Railroad - Head Tycoon
The Juvenile Traction Company - CEO & Apprentice Machinist 3rd Class
White Mountain Central RR - Engineer

Steve Bratina
Posts: 971
Joined: Tue Jan 16, 2007 9:39 pm
Location: Cambridge Ontario

Re: 85th Anniversary Meet at Montreal - Reminder

Post by Steve Bratina » Tue Jun 18, 2019 4:26 pm

?

elm53
Posts: 157
Joined: Fri Jan 02, 2009 6:51 pm
Location: worcester,ma

Re: 85th Anniversary Meet at Montreal - Reminder

Post by elm53 » Tue Jun 18, 2019 5:38 pm

Wouldn't be the same without ya chum!! Safe traveled Steve!

steamingdon
Posts: 486
Joined: Sun Feb 22, 2009 9:21 pm
Location: massachusetts,usa

Re: 85th Anniversary Meet at Montreal - Reminder

Post by steamingdon » Wed Jun 19, 2019 6:34 am

HuRRAYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY! Steve is in the roundhouse, well what do u know about that! :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :shock:
steamer

Mike Walsh
Posts: 634
Joined: Sun May 06, 2007 10:14 pm
Location: St. Louis, MO

Re: 85th Anniversary Meet at Montreal - Reminder

Post by Mike Walsh » Wed Jun 19, 2019 6:36 am

tsph6500 wrote:
Tue Jun 18, 2019 7:43 am
Look for smoke and guys in dirty overalls. That's us.
What happens if one encounters guys in clean overalls?

User avatar
Marty_Knox
Posts: 1392
Joined: Thu Jan 09, 2003 6:50 pm
Location: Michigan, USA

Re: 85th Anniversary Meet at Montreal - Reminder

Post by Marty_Knox » Wed Jun 19, 2019 9:15 am

tsph6500 wrote:
Tue Jun 18, 2019 8:17 am
Marty_Knox wrote:
Tue Jun 18, 2019 7:48 am

Merci, mon Ami!
You're all set!

Did we tell you that you must wear a black beret"?
Can I just turn my engineer's cap sideways?
Attachments
IMG_3493.JPG

steamingdon
Posts: 486
Joined: Sun Feb 22, 2009 9:21 pm
Location: massachusetts,usa

Re: 85th Anniversary Meet at Montreal - Reminder

Post by steamingdon » Thu Jun 20, 2019 6:43 am

Best selfie I`ve seen of u in a long time. LOL :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :wink:
steamer

User avatar
19copythree
Posts: 41
Joined: Thu Sep 14, 2006 9:22 pm
Location: Long Island, N.Y.

Re: 85th Anniversary Meet at Montreal - Reminder

Post by 19copythree » Thu Jun 20, 2019 9:32 am

Lone Long Islander latching out the lever...
_DSC0280.JPG

Post Reply