Gauging interest - 1" Scale Nathan Simplex
Posted: Sun Jun 30, 2019 3:56 pm
I'm looking to gauge interest in a 1" scale Nathan Simplex "R" injector. I'd really like to offer this with my product line, but I'm not sure if it's viable. Help to rid me of any uncertainty!
I'd like to stress that this is modeled solely from the original Nathan manufacturing drawings.
This will feature the same internals as the EE Small Scales injectors (30-150psi, 2.5 pints per minute @125psi)
- 3/16" tubing for steam inlet and delivery
- 1/4" for water inlet and overflow
- Water valve is cosmetic only
I have no plans to make this in 1.5/1.6" scale at this time.
Photos aren't uploading for some reason, but pictures and pricing can be seen on my website:
https://www.eccentricengineer.com/1-sca ... an-simplex
Anthony
I'd like to stress that this is modeled solely from the original Nathan manufacturing drawings.
This will feature the same internals as the EE Small Scales injectors (30-150psi, 2.5 pints per minute @125psi)
- 3/16" tubing for steam inlet and delivery
- 1/4" for water inlet and overflow
- Water valve is cosmetic only
I have no plans to make this in 1.5/1.6" scale at this time.
Photos aren't uploading for some reason, but pictures and pricing can be seen on my website:
https://www.eccentricengineer.com/1-sca ... an-simplex
Anthony