3/4" scale rolling stock and trucks
Re: 3/4" scale rolling stock and trucks
This is my freelance 3/4" tank car I made with scrap materials and cutoffs.
Re: 3/4" scale rolling stock and trucks
Jim,
They look great!
Keith
They look great!
Keith
Re: 3/4" scale rolling stock and trucks
Thanks Keith!
- Bill Shields
- Posts: 10582
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: 3/4" scale rolling stock and trucks
Good job...can you fill it with ice and beer?
Too many things going on to bother listing them.
Re: 3/4" scale rolling stock and trucks
Hi Bill, I would have loved to have made it a cooler or a beverage dispenser! This was my first attempt at a tank car so I wanted to stay focused on finishing it and learning from it. I was thinking if I could find some sort of a beverage plastic bag it could go on the inside? Just a thought.
The three attached screen shots are possible future 3/4” projects. I like the modern tank car with no frame under the tank. The open car is also a great looking car.
The three attached screen shots are possible future 3/4” projects. I like the modern tank car with no frame under the tank. The open car is also a great looking car.
- Adirondack
- Posts: 410
- Joined: Tue Aug 23, 2011 6:59 pm
- Location: southern CT
Re: 3/4" scale rolling stock and trucks
Just as an FYI, I am currently developing affordable, 3D printed trucks for 3/4" scale. They are just like their HO scale cousins, only much larger. (Yes, the springs had a misprint issue)
Chris
.
. . . .
Chris
.
. . . .
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!