Polling Pocket

[Trainsplanesandautos]

Does anyone cast a 1 1/2 scale polling pocket.

[Dick_Morris]

I have the patterns from Power Model Supply that they used before the business burnt down and the owner died. I think I have a few cast in Z-28 in the cupboard. If none of the commercial suppliers have them, I could probably supply a few. However, If I were going to do a non-functional trim item such as this now I'd probably print them on a resin 3D printer.

[Greg_Lewis]

If I were going to do a non-functional trim item such as this now I'd probably print them on a resin 3D printer.

Here ya go. Contact the designer and see if he or she can make it in 1 1/2 scale:
https://www.shapeways.com/product/SC5YU ... arketplace

[Bill Shields]

Try Howard Gorin. I think I have seen similar in his display

[Howard Gorin]

Thanks Bill, I make poleing pockets.

[FLSTEAM]

I have them in 2 1/2" scale

John B

[SZuiderveen]

They are not on their website, but Precision Scale Car has them. Bought some at Mill Creek in August.

[ccvstmr]

TomBeeOnline carries plastic poling pockets at $1.50 each. After some modification, mounted and painted, they won't look too bad. Carl B.

[jameshitz]

If you're still looking for poling pockets, I cast a small batch today. $16 for a set of four, plus shipping. 3 sets available.

[ccvstmr]

James...if you don't mind me asking, what kind of material did you cast those in? Plastic? Metal? Carl B.

[jameshitz]

They're aluminum castings.
thanks for asking.
James

[Trainsplanesandautos]

P.M. sent I will take 4.