Suppliers of 1" Rolling Stock
- tsph6500
- Posts: 1417
- Joined: Fri Dec 03, 2004 3:38 pm
- Location: West of Dunvegan, Ontario CANADA
- Contact:
Suppliers of 1" Rolling Stock
I am curious if there are any suppliers of 1" scale rolling stock in North America currently in business. Asking for a friend…
Best regards,
Jim Leggett
Montreal Live Steamers
www.montreallivesteamers.org
A Founding Member of the Tinkerbell Scale Society - Northern Division
I'm an A.R.S.E. (Association of Railroad Steam Engineers)
Toad Swamp & Punk Hollow Railroad - Head Tycoon
The Juvenile Traction Company - CEO & Apprentice Machinist 3rd Class
White Mountain Central RR - Engineer & Fireman
Jim Leggett
Montreal Live Steamers
www.montreallivesteamers.org
A Founding Member of the Tinkerbell Scale Society - Northern Division
I'm an A.R.S.E. (Association of Railroad Steam Engineers)
Toad Swamp & Punk Hollow Railroad - Head Tycoon
The Juvenile Traction Company - CEO & Apprentice Machinist 3rd Class
White Mountain Central RR - Engineer & Fireman
Re: Suppliers of 1" Rolling Stock
It's a good question. Pacific Design Shops has done a PFE reefer recently and I understand has plans for other products:
http://pacificdesignshops.com/
Despatch Railroad has also done flat and hopper kits as batches:
https://www.despatchrailroad.com/portfolio/
One Inch Railroad has the old Nelson Gray Mill gon listed but hasn't updated the web page in forever:
https://www.oneinchrr.com/CAT/gondola.htm
Those are the folks I know.
http://pacificdesignshops.com/
Despatch Railroad has also done flat and hopper kits as batches:
https://www.despatchrailroad.com/portfolio/
One Inch Railroad has the old Nelson Gray Mill gon listed but hasn't updated the web page in forever:
https://www.oneinchrr.com/CAT/gondola.htm
Those are the folks I know.
John Brock
- SPSteam2491
- Posts: 271
- Joined: Tue Feb 21, 2017 2:30 pm
- Location: Mukwonago, WI
Re: Suppliers of 1" Rolling Stock
Jim,
Along with the reefer cars that John posted above, we have future plans to start offering more 1" cars. Right now, we are in the designing phase of a 41' flat car with riveted sides and stake pockets modeled after a Southern Pacific F-50-16 flatcar. We just offered this in 1½" scale but was able to locate a source for 1" scale stake pockets. (See the picture attached)
Also on the designing table are 50' express reefers. The design is largely complete with just some detail parts to figure out. We are hoping to get this to the shop to cut by the end of April.
Along with the reefer cars that John posted above, we have future plans to start offering more 1" cars. Right now, we are in the designing phase of a 41' flat car with riveted sides and stake pockets modeled after a Southern Pacific F-50-16 flatcar. We just offered this in 1½" scale but was able to locate a source for 1" scale stake pockets. (See the picture attached)
Also on the designing table are 50' express reefers. The design is largely complete with just some detail parts to figure out. We are hoping to get this to the shop to cut by the end of April.
Thanks
John LaFavor
Pacific Design Shops
John LaFavor
Pacific Design Shops
-
- Posts: 463
- Joined: Sun Oct 23, 2005 9:27 am
- Location: Newbury, OH
Re: Suppliers of 1" Rolling Stock
Jim,
Backyard Trains in Denver also offers a steel gon, a low side aluminum gon, a steel flat car with wood deck and a 50' steel boxcar in 1" scale.
http://backyardtrainco.com/parts
Rob Gardner
Backyard Trains in Denver also offers a steel gon, a low side aluminum gon, a steel flat car with wood deck and a 50' steel boxcar in 1" scale.
http://backyardtrainco.com/parts
Rob Gardner