Did anyone take over production of Real Trains arch bar trucks?
I like the fact that they furnace braised the parts together.
Thanks
Real trains arch bar trucks
Re: Real trains arch bar trucks
I was told that RMI took those over, but I have not tried to contact them about them. Those were nice trucks I could use a pair or something I'm working on.
-
- Posts: 983
- Joined: Wed Jun 27, 2012 5:24 pm
- Location: Marietta, Georgia
Re: Real trains arch bar trucks
I believe RMI took them over, at least the large scale part. Though the arch bars I have are not brazed. There’s some welded fabricated pieces but the side frames are held together with bolts like the big ones.
Wouldn’t hurt to call RMI and ask Bill though. Afternoons Tuesday-Friday are best
Wouldn’t hurt to call RMI and ask Bill though. Afternoons Tuesday-Friday are best
-Tristan
Projects
-2.5" scale Class A 20 Ton Shay
Steam Siphon: https://www.shapeways.com/shops/leavitt ... tive-works
Projects
-2.5" scale Class A 20 Ton Shay
Steam Siphon: https://www.shapeways.com/shops/leavitt ... tive-works
-
- Posts: 348
- Joined: Tue Jan 07, 2003 2:56 am
- Location: Waltham, MA
Re: Real trains arch bar trucks
I have some of the parts to built the 1.5" scale Real Trains Arch Bar Trucks.
The side frame are furnace brazed.
I need to make the bolsters, wheel sets and other parts.
The side frame are furnace brazed.
I need to make the bolsters, wheel sets and other parts.
Re: Real trains arch bar trucks
Howard,
PM sent
Thanks
PM sent
Thanks