Looking for vendor of Ulin Shay castings
-
- Posts: 3
- Joined: Thu Aug 04, 2022 8:45 pm
Looking for vendor of Ulin Shay castings
Years ago I started a Shay based off the castings from Rich Ulin. I am looking to get the project going again, but it appears since his passing the castings have been passed to several people. From what I can tell Accucraft is the current supplier. I did reach out to them via email and have yet to get a response. I also see their website has no mention of the castings. Curious if anyone knows a current source for the Shay castings.
- ChuckHackett-844
- Posts: 240
- Joined: Wed May 03, 2017 3:54 pm
- Location: Tampa, Florida
Re: Looking for vendor of Ulin Shay castings
I don't know about Shay castings but I have a full set of Richard's Mason Bogie castings for sale ...
Regards,
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"
-
- Posts: 983
- Joined: Wed Jun 27, 2012 5:24 pm
- Location: Marietta, Georgia
Re: Looking for vendor of Ulin Shay castings
Accucraft has the patterns, bought them from Alco West. I don’t think anyone has actually poured castings from those patterns since Richard sold them though, and I’ve not heard a timeline for when Accucraft will start producing them either
-Tristan
Projects
-2.5" scale Class A 20 Ton Shay
Steam Siphon: https://www.shapeways.com/shops/leavitt ... tive-works
Projects
-2.5" scale Class A 20 Ton Shay
Steam Siphon: https://www.shapeways.com/shops/leavitt ... tive-works
-
- Posts: 3
- Joined: Thu Aug 04, 2022 8:45 pm
Re: Looking for vendor of Ulin Shay castings
I have a funny feeling that with the low demand Accucraft may not make the castings available again, but that is just suspicion on my part. I should still have all the drawings, maybe I'll take a swing at having some parts cast. At one time I had the drawings completed in Solidworks.
Re: Looking for vendor of Ulin Shay castings
You want to talk to David Coster. I'll PM you his contact info.
Live Steam Photography and more - gallery.mikemassee.com
Product Development and E-Commerce, Allen Models of Nevada
Product Development and E-Commerce, Allen Models of Nevada
-
- Posts: 3
- Joined: Thu Aug 04, 2022 8:45 pm
Re: Looking for vendor of Ulin Shay castings
Thank you Harlock. Just in case anyone is interested and comes across this thread, I spoke with Dave today and the Ulin castings will be released at a later date. There are some other projects he is working on 1st.
Re: Looking for vendor of Ulin Shay castings
Any word if these castings are going to be available again?