Does any one know if there is a live steamer that is using Young Valve Gear? I am thinking about building a 1-1/2" scale 2-8-2 with it.
Tim
Young Valve Gear
-
- Posts: 1598
- Joined: Sun Jan 05, 2003 8:47 am
- Location: Florida, on the Lake Wales Ridge
Young Valve Gear
He who dies with the most unfinished projects: Should of put more time into their hobby.
- Dick_Morris
- Posts: 2849
- Joined: Sat Jan 04, 2003 2:09 pm
- Location: Anchorage, AK
Re: Young Valve Gear
A friend used Young on a heavy Mike for several years. IIRC, he did it because he hadn't seen it done before. In a rebuild, he replaced it - with Baker IIRC. We've been running in different circles and I haven't talked to him for a couple of years, but could probably dig up an email address.
-
- Posts: 1598
- Joined: Sun Jan 05, 2003 8:47 am
- Location: Florida, on the Lake Wales Ridge
Re: Young Valve Gear
Hi Dick
That would be great.
Thanks
Tim
That would be great.
Thanks
Tim
He who dies with the most unfinished projects: Should of put more time into their hobby.
- Dick_Morris
- Posts: 2849
- Joined: Sat Jan 04, 2003 2:09 pm
- Location: Anchorage, AK
Re: Young Valve Gear
I left him a voice mail yesterday. I'll send you a note directly when I hear from him.