Portable elevated track ideas
Portable elevated track ideas
I am looking for Ideas on how to build a portable elevated track for 3 1/2 inch gauge. Does anyone have any ideas?
-
- Posts: 114
- Joined: Mon Sep 03, 2007 10:19 pm
- Location: Creston Iowa
Re: Portable elevated track ideas
The highline that the Iowa Model Steam Engineers has would work for a portable track. We purchased the left over from the St Croix live steamers.
There is a write up in the Best of Live Steam volume 1.
Wayne
There is a write up in the Best of Live Steam volume 1.
Wayne
-
- Posts: 215
- Joined: Sat Oct 15, 2011 10:04 am
- Location: Seattle Metro area
- Contact:
Re: Portable elevated track ideas
Here is a photo of part of the 250-foot long portable track that GGLS built in 1955 for the big Model Engineering Show they sponsored in the Oakland Auditorium (CA). As you can see, it was multi-gauge the same as they have in the Park. 2 1/2, 3 1/2 and 4 3/4 inch gauges.
Hope the photo gives you a good enough idea.
Ken Shattock
IBLS
Hope the photo gives you a good enough idea.
Ken Shattock
IBLS
Re: Portable elevated track ideas
There's a long discussion here:
http://www.chaski.org/homemachinist/vie ... ed#p165024
which i assume that you have read.
I can send you details of the elevated portable track that I'm working on if you PM me your e-mail address.
http://www.chaski.org/homemachinist/vie ... ed#p165024
which i assume that you have read.
I can send you details of the elevated portable track that I'm working on if you PM me your e-mail address.