source for oil cups

This Forum is dedicated to the Hobbyist I.C. (Internal Combustion) Engine Community.

Moderators: JackF, Harold_V

Post Reply
timekiller
Posts: 158
Joined: Sat Jan 04, 2003 12:33 pm
Location: Huntsville, AL U.S.A.

source for oil cups

Post by timekiller »

Hello,
I'm searching for some oil cups (please correct me if I'm using the wrong terminology) [img]/ubb/images/graemlins/shocked.gif"%20alt="[/img] Similiar to these in the attachment. The threads are 1/4" diameter.

Would anyone have a recommended source? TIA

Ray [img]/ubb/images/graemlins/cool.gif"%20alt="[/img]
Mike_Henry
Posts: 373
Joined: Sat Jan 04, 2003 1:05 pm

Re: source for oil cups

Post by Mike_Henry »

Here's a potential source:

http://www.catfish-hollow.com/me-acc.htm

You might also try web searches for "Sulphur Springs" and "PM Research" or "the North American Model Engineering Show" and check links for the vendors that display there.

Mike
Mike, near Chicago
timekiller
Posts: 158
Joined: Sat Jan 04, 2003 12:33 pm
Location: Huntsville, AL U.S.A.

Re: source for oil cups

Post by timekiller »

Thanks for the lead! [img]/ubb/images/graemlins/cool.gif"%20alt="[/img] Ray
dancinstv

Re: source for oil cups

Post by dancinstv »

Try www.gitsmfg.com
All kinds of oil cups sight glasses etc.
Steve
toolroom
Posts: 52
Joined: Sat Jan 26, 2013 11:12 am
Location: Portland (area) Oregon

Re: source for oil cups

Post by toolroom »

Hi Ray,
I am new to the forum, and even though your post is from 2003...if you still need an outlet for oil cups , anytime in the future, MSC has them in stock! O just ordered some for my lathe.
Hope it helps... Mom said, "better late than never."
Dinkin'
spro
Posts: 8016
Joined: Mon Feb 20, 2006 11:04 pm
Location: mid atlantic

Re: source for oil cups

Post by spro »

Welcome to the board ! Many things are helpful and sought as they were before and it was good to mention MSC still provides them.
Post Reply