Looking for 4-40, 5-40, 6-32 model bolts by the hundreds at reasonable prices. Anyone know of a source.? Thanks
Tom Stamey
tomstamey@sbcglobal.net
Where are model bolts available
Moderators: gwrdriver, Harold_V
Re: Where are model bolts available
American Model Engineering. Everything I have ordered from them is nice, and fast shipping too.
Re: Where are model bolts available
Tom,
American Model Eng'g Supply was taken over by Wayne Godshall. If you go to Wayne's website: http://www.godshallscustommachining.com/ you'll find a link there to the AMES part of the business. Should find a complete listing of all model bolt sizes and various lengths as well as nuts. All available in either brass, steel or stainless. As noted, they're quick to ship if they have the desired sizes/materials in stock. Be prepared, if you have a lengthy list, the total cost adds up fast. Never hurts to have a few extra nuts and bolts around. Just sayin'... Carl B.
American Model Eng'g Supply was taken over by Wayne Godshall. If you go to Wayne's website: http://www.godshallscustommachining.com/ you'll find a link there to the AMES part of the business. Should find a complete listing of all model bolt sizes and various lengths as well as nuts. All available in either brass, steel or stainless. As noted, they're quick to ship if they have the desired sizes/materials in stock. Be prepared, if you have a lengthy list, the total cost adds up fast. Never hurts to have a few extra nuts and bolts around. Just sayin'... Carl B.
Life is like a sewer...what you get out of it depends on what you put into it!
I don't walk on water...I just learned where some of the stepping stones are!
I love mankind...it's some of the people I can't stand!
I don't walk on water...I just learned where some of the stepping stones are!
I love mankind...it's some of the people I can't stand!
Re: Where are model bolts available
Definitely no shortage of them!
———————————————————————————————————————————————————————
Music isn’t at all difficult. All you gotta do is play the right notes at the right time!
Music isn’t at all difficult. All you gotta do is play the right notes at the right time!
-
- Posts: 1546
- Joined: Tue Mar 21, 2006 2:44 pm
- Location: East Hartford, CT
Re: Where are model bolts available
Micro Fasteners also sell those sizes.
My recommendation is use the stainless steel ones where any strength and corrosion resistance is needed. I only use brass for decorative purposes mostly. But hex heads may be larger than American Model Engineering.
You can get stainless small hex nuts from McMaster-Carr. They carry a reduced size hex series mostly used in electronics industry.
Rob
My recommendation is use the stainless steel ones where any strength and corrosion resistance is needed. I only use brass for decorative purposes mostly. But hex heads may be larger than American Model Engineering.
You can get stainless small hex nuts from McMaster-Carr. They carry a reduced size hex series mostly used in electronics industry.
Rob
-
- Posts: 33
- Joined: Sun Dec 11, 2016 10:58 am
Re: Where are model bolts available
I went to Godshaw's web but there is no listing of AMES parts and prices. So I emailed him for one.
Re: Where are model bolts available
The AMES website is still up and running. Order form is to Godshaw's address. Note the price list is out date but they will notify of any price increases at order.
http://www.americanmodeleng.com/id41.html
http://www.americanmodeleng.com/id41.html