Crosshead Guide Material

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: Harold_V, WJH, cbrew

Posts: 18759
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Re: Crosshead Guide Material

Post by Harold_V » Wed Apr 22, 2020 12:09 am

PeterCraymer wrote:
Tue Apr 21, 2020 7:20 am
PeterCraymer wrote:
Thu Apr 16, 2020 8:24 am
Often times keystock is plated as well, so that is another thing to look out for. I used 1/4 x 1/2" HRS for my 10-Wheeler and used the stock Allen Models cast bronze crossheads and have no problems after 7 years of running. Sure was nice not having to do much machining on those parts!
This should have read CRS! Oops! Y'all probably wondering what the heck is he talking about!
It shouldn't have offered much confusion, as HRS could certainly be used in place of CRS. It's just that both of them offer minimal wear resistance.

Wise people talk because they have something to say. Fools talk because they have to say something.

Post Reply