At 7 Rivers Surplus in Hokah, MN, there is a Burke 333 horizontal mill.
It's been there for a while and the owner wants to clean out some of the stuff that's just sitting there.
Needs a LOT of cleaning up.
Where there were handles, I was able to turn things.
It appears to have a Bridgeport mount build directly onto the ram, so you can have both horizontal and vertical in one compact package.
Spindle is 40 taper.
It was pulled out for a garage sale - it's been kept indoors in an unheated shed.
Original price tag says $850, but he said he'd take half of that.
I suspect if you offered more than scrap, he'd go for it.
He's got the capability to forklift it on or in your transportation.
If I had a shop with floor space, I'd probably take a chance on it - probably the last mill I'd ever need (I have a Bridgeport head just waiting to go on something like this).
You can get the manual here (thanks Keith Rucker!)
http://www.vintagemachinery.org/pubs/de ... x?id=18565
There's one on ebay that has some information:
https://www.ebay.com/itm/404417455738
Steve
Burke 333 horizontal mill cheap
Moderator: Harold_V
Burke 333 horizontal mill cheap
- Attachments
-
- BurkeMill (1).jpg (266.09 KiB) Viewed 942 times
-
- BurkeMill (2).jpg (175.21 KiB) Viewed 942 times
-
- BurkeMill (3).jpg (157.17 KiB) Viewed 942 times
-
- BurkeMill (4).jpg (185.76 KiB) Viewed 942 times
Last edited by SteveM on Mon Nov 20, 2023 7:46 pm, edited 1 time in total.
Re: Burke 333 horizontal mill cheap
More pictures
- Attachments
-
- BurkeMill (5).jpg (177.29 KiB) Viewed 941 times
-
- BurkeMill (6).jpg (153.55 KiB) Viewed 941 times
-
- BurkeMill (7).jpg (138.2 KiB) Viewed 941 times
Re: Burke 333 horizontal mill cheap
Sad to say, mill went to the scrapper yesterday.
Steve
Steve