I have a 42" disc of .060" stainless (exact ...

Sheet Metal Fabrication techniques, questions and help. "Tricks of the Trade"

Moderators: GlennW, Harold_V

GeorgeGaskill

Well, they didn't roll the edge but ...

Post by GeorgeGaskill »

they did give it some depth and texture.

Image

They have all the support pieces now but I have yet to see a picture of the complete edifice (they won't let stray civilians in without a background check.) I'll post a pic of the complete arrangement once I get one.
User avatar
Steve_in_Mich
Posts: 1119
Joined: Sat Jan 04, 2003 4:14 pm
Location: Mid Michigan

Re: Well, they didn't roll the edge but ...

Post by Steve_in_Mich »

Looks like a lot of anger and agression was let out in the forming process (that wouldn't be a bad place for it - better than a few alternatives I can think of).

LOOKS GOOD !
Just because you don’t believe it - doesn’t mean it’s not so.
GeorgeGaskill

Actually since the staff didn't trust the cons ...

Post by GeorgeGaskill »

to not beat on them or the other cons, they did all the hammering. The cons did additional dents with a heavy broomstick (used like a digging pole, not a handle) so they are responsible for some of the work. The project got second place to a model of the Taj Mahal but I think there were some internal politics involved in the decision.

Doesn't matter; the cons got to do something productive. Pix will follow tomorrow night.
Post Reply