Page 1 of 2

Picture test

Posted: Thu Nov 03, 2016 6:54 pm
by Marty_Escarcega
VFD enclosure with VFD mounted no wiring  small.jpg

Re: Picture test

Posted: Thu Nov 03, 2016 9:00 pm
by Steggy
Marty_Escarcega wrote:VFD enclosure with VFD mounted no wiring small.jpg
What was the size of the file from which you uploaded? PHP-BB seems to be truncating the file itself during the upload.

Re: Picture test

Posted: Fri Nov 04, 2016 5:21 am
by spro
I appreciate the improvements to the Board. This definition issue may well be to software, don't know. I'm a dumber dinosaur. I'm sure many tests included sending your file out and back to you. Something has been occurring with the Net.

Re: Picture test

Posted: Fri Nov 04, 2016 7:58 am
by GlennW
DSC00023.JPG
originally 5152 x 3864

Could it be Browser related?

I'm using Chrome and anything and everything I've tried seems to work.

Re: Picture test

Posted: Fri Nov 04, 2016 9:16 am
by Steggy
GlennW wrote:DSC00023.JPG
originally 5152 x 3864

Could it be Browser related?

I'm using Chrome and anything and everything I've tried seems to work.
Using Seamonkey, but have also tested on Internet Exploder. The key seems to be in the file size (not the image size) being truncated. What is the size of the file that you uploaded?

Re: Picture test

Posted: Fri Nov 04, 2016 9:54 am
by GlennW
7.1 mb

Re: Picture test

Posted: Fri Nov 04, 2016 10:53 am
by SteveHGraham
Using a lathe to make a hole in an exhaust flange?

Re: Picture test

Posted: Fri Nov 04, 2016 1:46 pm
by GlennW
Yes, the other three holes are done from the top in the mill, but that one hole is obscured by the pipe and needs to be done from the bottom.

The holes were just being enlarged to fit over larger studs.

Flood cutting oil and carriage feed wasn't so bad either with stainless.

Re: Picture test

Posted: Fri Nov 04, 2016 5:26 pm
by Steggy
SteveHGraham wrote:Using a lathe to make a hole in an exhaust flange?
Borrowing and corrupting your tagline, if your only tool is a lathe, everything is a turning job. :lol:

Re: Picture test

Posted: Fri Nov 04, 2016 5:28 pm
by Steggy
GlennW wrote:7.1 mb
Interesting. Did you reduce it in any way before uploading?

Re: Picture test

Posted: Fri Nov 04, 2016 6:57 pm
by SteveHGraham
I knew Glenn was not short on tools, so I wondered what was up.

Re: Picture test

Posted: Fri Nov 04, 2016 8:07 pm
by GlennW
BigDumbDinosaur wrote:
GlennW wrote:7.1 mb
Interesting. Did you reduce it in any way before uploading?
No, I didn't do anything. Just pointed to it and it uploaded and worked as usual.

Here's a 1.3 mb, so size doesn't seem to affect it.
P1160001.JPG
This is from home, which is running Chrome as well, though. The other was from my computer at work.