I finally got around to making a chuck adapter plate for my 6" rotab, made it out of gray cast iron
My hands get pretty dirty from handling the plate from the graphite that's in the cast iron,
is there something that can be used on the plate to lessen the smuttyness of it, tool black ?
Cast iron blackening !
- Bill Shields
- Posts: 10463
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: Cast iron blackening !
Tough to get stuff to stick to graphite.
I just wash it down with solvent and call it a day.
And wear gloves....
I just wash it down with solvent and call it a day.
And wear gloves....
Too many things going on to bother listing them.
Re: Cast iron blackening !
...and don’t breath too deeply when the black stuff goes flying.Bill Shields wrote: ↑Mon Mar 06, 2023 10:29 pm Tough to get stuff to stick to graphite.
I just wash it down with solvent and call it a day.
And wear gloves....
———————————————————————————————————————————————————————
Music isn’t at all difficult. All you gotta do is play the right notes at the right time!
Music isn’t at all difficult. All you gotta do is play the right notes at the right time!