EMCO MILL HEAD GREASE....TYPE /

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
neophyte
Posts: 33
Joined: Sat Mar 21, 2009 1:47 pm
Location: Canton, Mi.

EMCO MILL HEAD GREASE....TYPE /

Post by neophyte »

The contents of this post have been deleted.

It is strongly advised that there be NO double posting. By doing so, comments get split, so replies posted can be difficult to find. In general, multiple posts are confusing, therefore not acceptable on this forum.

When posting, please make a choice of the forum you prefer, and post ONLY there.

Readers that care to view the deleted post can click this link:

http://www.chaski.org/homemachinist/vie ... &highlight

Please leave your comments there.

Harold
16WhiteColly
Posts: 56
Joined: Thu Jun 04, 2020 2:59 pm

Re: EMCO MILL HEAD GREASE....TYPE /

Post by 16WhiteColly »

I have always wondered about the mill spindle lubrication on a 3 in 1 machine, how the mill spindle gets lubrication. I thought maybe they used permanently lubricated bearings. The Manual does not mention routine lubrication of the mill spindle like it does with all other areas of the machine.
40 year retired machinist.
Post Reply